2n M2M Solution 2N SmartCom - User Manual 1.9.0 Manual de usuario Pagina 30
- Pagina / 149
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
302N TELEKOMUNIKACE a.s., www.2n.cz
®
4.1 Configuration
The basic configuration and firmware download take place during the2N SmartCOM
®
manufacturing process. In general, no additional configuration is necessary except for
GPRS connection to the Internet on the GSM module and the port baud rates, which
may be different depending on the providers and types of peripherals. You can
configure in one of the following two ways.2N SmartCOM
®
Via the RS-232 serial interface; or
Via the IP interface.
Configuration via RS 232
The RS-232 port is always in the data mode upon power up, which means that it
retransmits all captured events to GPRS port 10001. Therefore, to configure 2N
®
via the serial port, switch the port into the command mode first and then SmartCOM
get connected to it using your PC serial port. The baud rate is 115,200 bps by default.
Now enter the following sequence of characters, preceded and followed by a 1–second
delay, into the terminal:
+++
When answers OK, you can start configuring the device using the AT2N SmartCOM
®
commands listed in .Subs. 4.2
Restart the RS-232 port when you have finished configuring to return into the data
mode. Send the following command:
at^scport1="restart"
Configuration via IP
If you know the public IP address, you can configure the device2N SmartCOM
®
remotely too using the IP protocol. If not, connect to using RS-232 as2N SmartCOM
®
described above and send one of the following commands (for GPRS/Ethernet):
at^sccfg="local_ip"
at^sceth="local_ip"
2N SmartCOM
®
will send you the IP address as negotiated with the provider or
assigned by the DHCP server in the Ethernet case. If a fixed public IP address is
activated on the SIM card, the SIM will always use this IP address. If a dynamic public
IP address is used, check the IP address whenever your restart the device.
- 2N SmartCom 1
- 1. Product Overview 5
- 1.1 Product Description 6
- 1.2 Upgrade 8
- 1.3 Terms and Symbols Used 9
- 2.1 Basic Version Description 11
- 2.2 PRO Version Description 13
- 2.3 Before You Start 15
- 2.4 Mounting 16
- 3. Function and Use 19
- 3.1 Putting in Operation 20
- 3.2 GSM LED Indicator 21
- 3.3 Input and Output Circuits 22
- Output Circuits 23
- IP Access 24
- Real Time Clock 25
- Wireless M–Bus Interface 25
- ZigBee Interface 26
- 3.4 Input Calibration 27
- 4. Configuration by Terminal 29
- 4.1 Configuration 30
- 2N SmartCOM GSM Commands 32
- Port 1 (RS 232) SC Commands 34
- Relay Outputs 36
- ADC – Input Circuits 38
- S0 – Pulse Counting 41
- General Commands 43
- Test Command 46
- 5. Configuration by SMS 58
- INFO SMS 59
- Basic Settings 60
- Relay Control 62
- Error Replies 64
- 6. Terminal Config 66
- Application Details 67
- Application Use 70
- Figure: Ethernet Menu 71
- Figure: IP Access Menu 77
- 7. Control Panel 78
- 7.1 SC Server 79
- Licencing 80
- 7.2 Control Panel 82
- Introduction to Application 84
- Figure: Application Window 85
- Basic Controls 86
- 7.3 Control Panel Use 88
- Connections 90
- Virtual Ports 92
- Settings 94
- Admin Mode 96
- Terminals 99
- Server Settings 101
- Firmware Management 103
- 8. AT API 107
- 8.1 AT API Description 108
- 8.2 Supported Commands 109
- Terminal Connection 111
- Terminal Communication 111
- Port Settings 112
- Terminal Data Reading 113
- 9. User Defined Functions 117
- 9.1 UDF Description 118
- 9.2 UDF Condition Setting 119
- Action Types 121
- Action Parameters 123
- Counters 125
- Error Codes 125
- 10. sc_config 128
- Database Export and Import 129
- Setting Options 130
- 11. Maintenance 134
- 11.2 Factory Default Reset 136
- 11.3 Repairs 137
- 12. Technical Parameters 138
- Power Supply 139
- Relays (Two) 139
- Input Circuits to ADC (Two) 140
- RS232 Interface 140
- Working Conditions 140
- CE certificate 143
- 13. Supplementary 144
- Information 144
- 13.1 List of Abbreviations 145
Relacionado con productos y manuales para Accesorios de comunicación 2n M2M Solution 2N SmartCom - User Manual 1.9.0
Accesorios de comunicación 2n 4G wireless router 2N SpeedRoute - User manual, 18 Manual de usuario
(101 paginas)
(101 paginas)
Accesorios de comunicación 2n OfficeRoute - User manual, 1493 v1.9.0 Manual de usuario
(113 paginas)
(113 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales