2n Helios IP Automation Manual v2.7 Manual de usuario descargar pdf (Pagina 41)

412N TELEKOMUNIKACE a.s., www.2n.cz

Door Opening by RFID Card

Specification

Activate the door contact switch by tapping/swiping the proper RFID card on/through

the reader.

Block diagram

Entering an RFID card with the defined ID (1: Event.CardEntered) activates switch 1

(2: Action.ActivateSwitch).

Intercom settings

1: Event.CardEntered: Card=0*0000

2: Action.ActivateSwitch: Switch=1; Event=1

Alarm (Dispatching Office Call) Caused by Over 2-Min

Long Door Opening

Specification

Call the dispatching office in case the door remains open for more than 2 minutes. It is

supposed that the door opening signalling contact is connected to Input1.

Block diagram

Whenever the door opens, the rising edge on Input1 signal (1: Event.InputChanged)

calls the defined telephone number (4: Action.BeginCall) with a 120s delay (2:

Event.Delay).The call is only executed if the door remains open for more than 120 s (3:

Condition.InputState).

1 2 ... 36 37 38 39 40 41 42 43 44

Sin comentarios

2n Helios IP Automation Manual v2.7 Manual de usuario Pagina 41