2n Helios IP Automation Manual v2.7 Manual de usuario descargar pdf (Pagina 19)

192N TELEKOMUNIKACE a.s., www.2n.cz

4. Actions

2N Helios IP Automation

– defines the following types of actions:

ActivateSwitch – switch activation

SetOutput – digital output state setting

BeginCall – outgoing call setup

AnswerCall – incoming call answer

EndCall – call termination

SendHttpRequest – HTTP command sending

SendMulticastRequest – command sending to multiple devices

PlayUserSound – user sound playing

StartMulticastSend – audio stream sending start

StopMulticastSend – audio stream sending stop

StartMulticastRecv – audio stream receiving start

StopMulticastRecv – audio stream receiving stop

SetCameraInput – camera input selection

ControlRtpStream – call RTP stream control

LogEvent – event logging to the syslog server

SendEmail – email sending

Action.ActivateSwitch

The block defines the action necessary for activation of the intercomActivateSwitch

switch as configured in the Switch 1–4 tags. The activity to be performed depends fully

on the particular switch settings (digital output activation, HTTP command sending,

etc.). Switch deactivation is controlled by the switch settings too.

Parameters

Event – define the event to launch the action.

Condition – define the condition to be met to execute the action. This parameter

is optional.

Switch – define the switch to be activated (1 to 4).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Sin comentarios

2n Helios IP Automation Manual v2.7 Manual de usuario Pagina 19