2n Helios IP Automation Manual v2.7 Manual de usuario descargar pdf (Pagina 30)

302N TELEKOMUNIKACE a.s., www.2n.cz

Example

The condition is met for inactive time profile 1:

Condition.ProfileState: Profile=1; State=Inactive

Condition.CallState

The block defines the condition to be met in the case of a defined state ofCallState

the currently made call.

Parameters

State – define the call state.

Valid values:

idle – call is not being made

connecting call setup in progress–

ringing – ringing in progress

connected – call connected.

Direction – define the call direction.

Valid values:

incoming – incoming calls

outgoing – outgoing calls

any – both directions.

The parameter is optional, the default value is .any

Example

The condition is met for an inactive call:

Condition.CallState: State=Inactive

Condition.InputState

The block defines the condition to be met in case the defined logic levelInputState

gets connected to the defined digital input.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Sin comentarios

2n Helios IP Automation Manual v2.7 Manual de usuario Pagina 30