2n Helios IP Automation Manual v2.7 Manual de usuario descargar pdf (Pagina 27)

272N TELEKOMUNIKACE a.s., www.2n.cz

The parameter is optional, the default value is .1

Example

Switch the video signal source to the first external analogue camera input if the event

defined on row 2 arises:

Action.SetCameraInput: Type=internal; Id=1; Event=2

Action.ControlRtpStream

Block defines the action that controls the flow of the RTP streams. ControlRtpStream

This action controls only call streams; multicast streams are not affected by this action.

Parameters

Event – define the event to launch this action.

Condition – define the condition to be met for the action to be executed. This

parameter is optional.

Direction – define the call RTP stream playing direction.

Valid values:

in – incoming stream to the intercom

out – outgoing stream from the intercom

both – incoming and outgoing stream.

The parameter is optional, the default value is . both

– define the RTP stream operation.Operation

Valid values

mute – mute the stream

unmute – unmute the stream (stream is played).

Example

Mute call streams in both ways : if the event defined on row 2 arises

Action.ControlRtpStream: Direction=both; Operation=mute; Event=2

Action.LogEvent

The block defines the action that logs the event to the syslog server. This LogEvent

block can be used for verification of Automation settings.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Sin comentarios

2n Helios IP Automation Manual v2.7 Manual de usuario Pagina 27