2n Helios IP Automation Manual v2.7 Manual de usuario descargar pdf (Pagina 31)

312N TELEKOMUNIKACE a.s., www.2n.cz

Parameters

Input – define the digital input.

Valid values:

tamper – tamper switch

input1 – digital input 1

input2 – digital input 2

cr_input1 – digital input 1 on card reader

cr_input2 – digital input 2 on card reader.

There may be different lists of valid values for different 2N Helios IP

models; refer to the Available Digital Inputs and Outputs subsection.

Level – define the required digital input level. The parameter is optional.

Valid values:

0 – logic 0

1 – logic 1 (default value).

Example

The condition is met for an activated tamper switch (device not open):

Condition.InputState: Input1=tamper; Level=0

Condition.LogicalAnd

The block helps you create groups of conditions. The block is fulfilled if allLogicalAnd

the conditions in the defined group are met.

Parameters

Condition – define the list of conditions to be met. Separate the conditions with

a comma.

Example

The condition is met if conditions 1, 2 and 3 are met at the same time:

Condition.LogicalAnd: Condition=1, 2, 3

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Sin comentarios

2n Helios IP Automation Manual v2.7 Manual de usuario Pagina 31