2n Analogue UMTS gateway 2N SmartGate UMTS - Manual, Manual de usuario descargar pdf (Pagina 58)

Voice function

4.1

Configuration of network services

2N® SmartGate UMTS provides some of network services to improve possibility of

usage. The configuration is done by standard Star-Hash codes you can know from

mobile phones.

To configure these services:

1. Hook off the telephone, you can hear the dial tone.

2. Enter the Star-Hash code described below.

3. Wait for information tone. You may wait about 3 seconds.

4. Hook on.

Information tones:

Confirmation - OK:

n Confirms that the service was configured correctly.

Confirmation - bad:

n Service was not correctly configured

n Service isn’t activated by your provider

Confirmation - service activated:

n Confirms that the service was configured correctly and the service is

activated.

Confirmation - service deactivated:

n Confirms that the service was configured correctly and the service is

deactivated.

Call forwarding

For forwarding activation you must specify <Telephone number> the calls will be

forwarded to. You may specify <Call type>, if you want to forward specified call

type only. You may specify <Delay time> in seconds for forwarding if no answer

too.

Description of <Call type> field codes:

Voice:

Data:

Fax:

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 82 83

Sin comentarios

2n Analogue UMTS gateway 2N SmartGate UMTS - Manual, Manual de usuario Pagina 58