2n Analogue UMTS gateway 2N SmartGate UMTS - Manual, Manual de usuario descargar pdf (Pagina 33)

Table of Parameters

3.2

Default setting: 425 Hz

Ringback tone – frequency 2 [Hz] Function No.: 127

Setting of frequency 2 of ringback tone.

Setting options: 1-3400 Hz

Setting step: 1 Hz

Default setting: 425 Hz

Ringback tone - cadence Function No.: 128

Ringback tone cadence setting.

Setting options:

OFF (0) -not generated, only network tone

1000/4000 ms (1) -cadence 1 s tone, 4 s pause

400/200/400/2000 ms (2) -cadence 2x400 ms tone,

2 s pause

1500/3500 ms (3) -cadence 1,5 s tone, 3,5 s pause

2000/4000 ms (4) -cadence 2 s tone, 4 s pause

Default setting: OFF

Tone after disconnection Function No.: 129

If the remote subscriber hangs up first, the 2N® SmartGate UMTS subscriber

can hear the tone selected here.

Setting options: Busy (0)-2N® SmartGate UMTS transmits the busy

tone upon call end.

Permanent (1) -2N® SmartGate UMTS transmits the

permanent tone upon call end.

Default setting: Busy tone

Volumes

Transmission volume Function No.: 190

Volume setting for UMTS/GSM transmission with a 4 dB step.

Setting options: 1-5

Setting step: 1

Default setting: 3 = medium volume level

Reception volume Function No.: 191

Volume setting for UMTS/GSM reception with a 4 dB step.

Setting options: 1-5

Setting step: 1

Default setting: 3 = medium volume level

Ringing signal settings

Ringing signal – frequency [Hz] Function No.: 140

Ringing signal frequency setting.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 82 83

Sin comentarios

2n Analogue UMTS gateway 2N SmartGate UMTS - Manual, Manual de usuario Pagina 33