2n Analogue UMTS gateway 2N SmartGate UMTS - Manual, Manual de usuario descargar pdf (Pagina 37)

Table of Parameters

3.2

Setting options: 1-3400 Hz

Setting step: 1 HzD

efault setting: 425 Hz

Dial tone – frequency 2[Hz] Function No.: 221

Setting of frequency 2 of dial tone.

Setting options: 1-3400 Hz

Setting step: 1 Hz

Default setting: 425 Hz

Dial tone - cadence Function No.: 222

Dial tone cadence setting.

Setting options: Continuous ( 0) -2N® SmartGate UMTS generate

continuous dial tone

Morse A (1) -2N® SmartGate UMTS generate dial tone

with 330/330/660/660 ms timing

Default setting: Continuous

Ring back tone – frequency 1 [Hz] Function No.: 226

Setting of frequency 1 of ringback tone. This tone is send after dialing end,

before UMTS/GSM network starts to generate its own Ringback tone.

Setting options: 1-3400 Hz

Setting step: 1 Hz

Default setting: 425 Hz

Ringback tone – frequency 2 [Hz] Function No.: 227

Setting of frequency 2 of ringback tone.

Setting options: 1-3400 Hz

Setting step: 1 Hz

Default setting: 425 Hz

Ringback tone - cadence Function No.: 228

Ringback tone cadence setting.

Setting options: OFF (0) -not generated, only network tone

1000/4000 ms (1) -cadence 1 s tone, 4 s pause

400/200/400/2000 ms (2) -cadence 2x400 ms tone,

2 s pause

1500/3500 ms (3) -cadence 1,5 s tone, 3,5 s pause

2000/4000 ms (4) -cadence 2 s tone, 4 s pause

Default setting: OFF

Volumes

Transmission volume Function No.: 190

See FXS interface parameters.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 82 83

Sin comentarios

2n Analogue UMTS gateway 2N SmartGate UMTS - Manual, Manual de usuario Pagina 37