2n Helios IP Automation v2.5 Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 33
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
312N TELEKOMUNIKACE a.s., www.2n.cz
®
Intercom settings
1: Event.CardEntered: Card=0*0000
2: Action.ActivateSwitch: Switch=1; Event=1
Alarm (Dispatching Office Call) Caused by Over
2-Min Long Door Opening
Specification
Call the dispatching office in case the door remains open for more than 2 minutes. It is
supposed in the example that the door opening signalling contact is connected to
Input1.
Block diagram
Whenever the door opens, the rising edge on Input1 signal (1: Event.InputChanged)
calls the defined telephone number (4: Action.BeginCall) with a 120s delay (2:
Event.Delay).The call is only executed if the door remains open for more than 120s (3:
Condition.InputState).
Intercom settings
1: Event.InputChanged: Input=input1; Edge=rising
2: Event.Delay: Delay=120s; StartEvent=1
3: Condition.InputState: Input=input1; Level=1
4: Action.BeginCall: Number=1111; Event=2; Condition=3
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33

Comentarios a estos manuales

Sin comentarios