2n Helios IP Automation v2.5 Manual de usuario descargar pdf (Pagina 15)

152N TELEKOMUNIKACE a.s., www.2n.cz

4. Actions

2N Helios IP Automation

defines the following types of actions:–

ActivateSwitch – switch activation

SetOutput – digital output state setting

BeginCall – outgoing call setup

AnswerCall – incoming call answer

EndCall – call termination

SendHttpRequest – HTTP command sending

Action.ActivateSwitch

The block defines the action necessary for activation of the intercomActivateSwitch

switch as configured in the Switch 1 – 4 tags. The activity to be performed depends

fully on the particular switch settings (digital output activation, HTTP command

sending, etc.). Switch deactivation is controlled by the switch settings too.

Parameters

Event

Define the event to launch the action.

Condition

Define the condition to be met to execute the action. This parameter is optional.

Switch

Define the switch to be activated (1 to 4).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 32 33

Sin comentarios

2n Helios IP Automation v2.5 Manual de usuario Pagina 15