2n Helios IP Automation v2.5 Manual de usuario descargar pdf (Pagina 22)

222N TELEKOMUNIKACE a.s., www.2n.cz

Example

The condition is met for an inactive call:

Condition.CallState: State=Inactive

Condition.InputState

The block defines the condition to be met in case the defined logic levelInputState

gets connected to the defined digital input.

Parameters

Input

Define the digital input.

Valid values:

tamper – tamper switch

input1 – digital input 1

input2 – digital input 2

cr_input1 – digital input 1 on card reader

cr_input2 – digital input 2 on card reader

There may be different lists of valid values for different models; refer2N Helios IP

to the Available Digital Inputs and Outputs subsection.

Level

Define the required digital input level. The parameter is optional.

Valid values:

0 – logic 0

1 – logic 1 (default value)

Example

The condition is met for an activated tamper switch (device not open):

Condition.InputState: Input1=tamper; Level=0

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 32 33

Sin comentarios

2n Helios IP Automation v2.5 Manual de usuario Pagina 22