2n Helios IP Automation Manual v2.8 Manual de usuario descargar pdf (Pagina 30)

302N TELEKOMUNIKACE a.s., www.2n.cz

Condition.CallState

The block defines the condition to be met in the case of a defined state ofCallState

the currently made call.

Parameters

State – define the call state.

Valid values:

idle – call is not being made

connecting call setup in progress–

ringing – ringing in progress

connected – call connected.

Direction – define the call direction.

Valid values:

incoming – incoming calls

outgoing – outgoing calls

any – both directions.

The parameter is optional, the default value is .any

Example

The condition is met for an inactive call:

Condition.CallState: State=Idle

Condition.InputState

The block defines the condition to be met in case the defined logic levelInputState

gets connected to the defined digital input.

Parameters

Input – define the digital input.

Valid values:

tamper – tamper switch

input1 – digital input 1

input2 – digital input 2

cr_input1 – digital input 1 on card reader

cr_input2 – digital input 2 on card reader.

There may be different lists of valid values for different 2N Helios IP

models; refer to the Available Digital Inputs and Outputs subsection.

Level – define the required digital input level. The parameter is optional.

Valid values:

0 – logic 0

1 – logic 1 (default value).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 42 43

Sin comentarios

2n Helios IP Automation Manual v2.8 Manual de usuario Pagina 30