2n Helios IP Automation Manual v2.8 Manual de usuario descargar pdf (Pagina 22)

222N TELEKOMUNIKACE a.s., www.2n.cz

Example

Terminate a call if the event defined on row 2 arises:

Action.EndCall: Event=2

Action.SendHttpRequest

The block defines the action necessary for sending of an HTTPSendHttpRequest

command to another LAN device. The HTTP command helps you control other devices

in the LAN (IP relay, recording system, another intercom, etc.).

Parameters

Event – efine the event to launch the action. d

Condition – define the condition to be met to execute the action. This parameter

is optional.

Uri – define the standard HTTP URI including the destination address and,

optionally, the path and other parameters.

Example

Send an HTTP command to the device with the IP address 192.168.1.1 if the event

defined on row 2 arises:

Action.SendHttpRequest: uri= ; Event=2http://192.168.1.1/message

Action.SendMulticastRequest

The block defines the action necessary for user commandSendMulticastRequest

sending to multiple devices. The sent command can be processed by the

MulticastTrigger block. The command is a message sent by UDP to a multicast address

(235.255.255.250:4433) and can thus be received by multiple devices at the same

time. The message includes the command ID (Command parameter) and additional

optional parameters (Params parameters). The message can be password-secured

(Password parameter).

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 42 43

Sin comentarios

2n Helios IP Automation Manual v2.8 Manual de usuario Pagina 22