2n Helios IP Automation Manual v2.8 Manual de usuario descargar pdf (Pagina 21)

212N TELEKOMUNIKACE a.s., www.2n.cz

Parameters

Event – define the event to launch the action.

Condition – define the condition to be met to execute the action. This parameter

is optional.

Number – define the phone number to be called.

Uri – define the SIP URI to be called: sip:user@domain

User – define the phone book number to be called. The valid values are 1

through 999 (depending on the intercom model).

Enter just one of the above mentioned parameters ( , or ).Number Uri User

Example

Establish an outgoing call if the event defined on row 2 arises:

Action.BeginCall: Number=1001; Event=2

Action.AnswerCall

The block defines the action necessary for answering of an incoming call.AnswerCall

In case no call is coming or the incoming call is not ringing, the action will not initiate

any activity.

Parameters

Event – define the event to launch the action.

Condition – define the condition to be met to execute the action. This parameter

is optional.

Example

Answer a call if the event defined on row 2 arises:

Action.AnswerCall: Event=2

Action.EndCall

The block defines the action necessary for termination of the currently madeEndCall

call. In case there is no active call via the intercom, the action will not initiate any

activity.

Parameters

Event – define the event to launch the action.

Condition – define the condition to be met to execute the action. This parameter

is optional.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 42 43

Sin comentarios

2n Helios IP Automation Manual v2.8 Manual de usuario Pagina 21