2n Helios IP Configuration Manual v2.7 Manual de usuario descargar pdf (Pagina 37)

372N TELEKOMUNIKACE a.s., www.2n.cz

Activation by quick dial button – assign a quick dial button to the switch. The

switch is activated whenever the button is pressed.

Sound signalling – set the sound signalling type for switch activation. Choose

the Short beep, Long beep (during the whole activation) or a User sound (refer to

the User Sounds subsection).

Display info – enable/disable signalling of an activated switch on the display.

Synchronise with – set switch synchronisation to enable automatic switch

activation after another switch activation with a predefined delay. Define the

delay in the parameterSynchronisation delay

Synchronisation delay – set the time interval between synchronised activations

of two switches. The parameter will not be applied if the function isSynchronise

disabled.

Command sent upon activation – set the command to be sent to the external

device (WEB relay, e.g.) upon switch activation. The command is sent via the

HTTP (GET request) and must be as follows: http://ip_address/path. E.g.:

.http://192.168.1.50/relay1=on

Command sent upon deactivation – set the command to be sent to the

external device (WEB relay, e.g.) upon switch deactivation. The command is sent

via the HTTP (GET request) and must be as follows: http://ip_address/path.

Note

The HTTP command sending is available with the Gold or Enhanced

Integration licence only .

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 114 115

Sin comentarios

2n Helios IP Configuration Manual v2.7 Manual de usuario Pagina 37