2n Helios IP Configuration Manual v2.7 Manual de usuario descargar pdf (Pagina 103)

1032N TELEKOMUNIKACE a.s., www.2n.cz

2N Helios IP Vario

with MAC address 00-87-12-AA-00-11 downloads the following

files from the TFTP server:

hipv-firmware.bin

hipv-common.xml

hipv-00-87-12-aa-00-11.xml

Configuration

Use the tab to set automatic configuration download from the serverConfiguration

defined by you. The intercom periodically downloads a file from the server and gets

reconfigured without getting restarted.

List of Parameters

Firmware update enabled – enable automatic firmware/configuration updating

from the TFTP/HTTP server.

Address retrieval mode – select whether the TFTP/HTTP server address shall

be entered manually or a value retrieved automatically from the DHCP server

using Option 66 shall be used.

Server address – enter the TFTP (tftp://ip_address), HTTP ( )http://ip_address

or HTTPS ( ) server address manually.https://ip_address

DHCP (Option 66/150) address – check the server address retrieved via the

DHCP Option 66 or 150.

File path – set the firmware/configuration filename directory or prefix on the

server. The intercom expects the XhipY_firmware.bin, XhipY-common.xml and

XhipY-MACADDR.xml files, where X is the prefix specified herein and Y specifies

the intercom model.

Poznámka

A few seconds' interruption of the display function occurs in the

display-equipped models during reconfiguration.2N Helios IP Vario

Therefore, we recommend you to update when the intercom traffic is very

low (at night, e.g.).

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 114 115

Sin comentarios

2n Helios IP Configuration Manual v2.7 Manual de usuario Pagina 103