2n EasyGate - User Manual Manual de usuario descargar pdf (Pagina 24)

8.3. Parameter Tables

All programmable parameters are listed in this section. Each parameter is

accompanied with the unit used, function number (if available) for programming via a

telephone line, description of EasyGate's behavior, setting options, setting step and

default (initialization) value.

8.3.1. Telephone Line Parameters

Type of dialing Function No.: -

Select the dialing type to be received by EasyGate from the PBX or telephone

set. EasyGate accepts only the selected type of dialing, ignoring the others.

Setting options:

DTMF -EasyGate receives tone dialing only.

Pulse -EasyGate receives pulse dialing only

Default setting: DTMF

Time to dial [s] Function No.: -

Timeout during which EasyGate waits for further digits to be dialed. It starts to

establish connection when this timeout passes.

Setting options: 1-15 s

Setting step: 1 s

Default setting: 5 s

Dial tone Function No.: -

This tone is generated after Off-Hook in case EasyGate is ready to accept

dialing.

Setting options:

Continuous -EasyGate generates continuous dial tone.

Interrupted -EasyGate generates interrupted tone with 320/640 ms timing.

Default setting: Continuous

Tone after disconnection Function No.: -

If the remote subscriber hangs up first, the EasyGate subscriber can hear the

tone selected here.

Setting options:

Busy -EasyGate transmits the busy tone upon call end.

Permanent -EasyGate transmits the permanent tone upon call end.

Default setting: Busy tone

Minimal On Hook [ms] Function No.: -

The minimum line current discontinuation that EasyGate evaluates as hang-up.

Setting options: 100-1500 ms

Setting step: 100 ms

Default setting: 500 ms

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Sin comentarios

2n EasyGate - User Manual Manual de usuario Pagina 24