2n Omega series - Configuration Tool manual v1.10 Manual de usuario descargar pdf (Pagina 55)

2.5. External lines

2.5.1. Types of lines

In this table the properties of the individual lines for the analogue external lines is

set up

Analogue external line

 Name – a maximum 14-character name for the external line

 Series – only an incoming external line which has not been tested for correct

working and cannot be entered upon in the outgoing direction

 16 kHz – an external line with a 16 kHz impulse receiver

 Private – a line connected to a private network, which is not charged.

 Without authorisation – on this line a check of authorisation is not made

 Test CPT. A test for the dialling tone on the external line

 Current test. The other option is to test the line current when answering

 Prefix- a 4-digit prefix, which is automatically chosen as the first (DID through a

superior PBX) after engaging a line. The prefix is not recorded in the charging

row.

 Dialling – setting the type of dialling for an external line

 Announcement tone length– determines how long it must detect an external

dialling t

then the tone is never checked and this line will thus never report a fault.

 Time to dial startup determines the minimum time for dialling to be started

after the external dialling tone has been detected

 Min time for accounting – the period deducted from the call time for temporary

charging

 Priority – an internal line must have higher or the same priority so that it can

use this external line.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 113 114

Sin comentarios

2n Omega series - Configuration Tool manual v1.10 Manual de usuario Pagina 55