2n Fixed line replacement with 2N SmartGate - Manual Manual de usuario descargar pdf (Pagina 28)

2N® SmartGate parameters configuration

3.1

Monitoring

Monitoring is active when the gateway is in operation and registered to the GSM

network. If the gateway is not registered to GSM, the COM is blocked and no

monitoring can be made.

This simple informative function helps you identify:

 The GSM module type and IMEI ID;

 The SIM card IMSI ID and selected SMS service centre necessary for SMS

sending;

 The GSM provider's name and signal strength received by -

this information helps you find the optimum signal location (the information is

updated in 10s intervals);

 The line status  standby, outgoing call, incoming call

including telephone number. The COM is locked during dialing and incoming call

ringing, so the PCManager reports COM blocking.

 Time set in gateway, the time is taken from network, when the network

supplies this information. It is possible to set it from PC or manually, this

information is lost, when the gateway is switched off. Special versions of

gateways are equipped with backup supply to support clock during power

failure.

Figure 3.2

SmartGate

PC Manager

monitor

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 88 89

Sin comentarios

2n Fixed line replacement with 2N SmartGate - Manual Manual de usuario Pagina 28