2n Door intercom 2N Helios - Manual, 1322 v3.0 Manual de usuario descargar pdf (Pagina 37)

2.6 Buttons Labels – Insertion,

Replacement

Instructions

1. Remove the 2N® Helios metal cover. To do this,

use a hexagonal key, unscrew the screw as

shown in the figure and take the cover off.

2. Remove the name plates as shown in the

figure using, e.g., a screw driver.

3. Remove the name plate inserts as shown

in the figure.

4. Insert the labels printed on foil (see later).

5. Replace the name plate inserts.

6. Put the name plates back in the depression and click into position. The name

plates keep the matt foil steady.

7. Replace and screw on the metal cover.

Note

 You can remove the name plates even without removing the metal cover

however damage, if any, incurred as result of this, is not covered by the

warranty.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 75 76

Sin comentarios

2n Door intercom 2N Helios - Manual, 1322 v3.0 Manual de usuario Pagina 37