2n PRI Gateways - User Manual Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 105
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
14
3.1.4. Configuration Jumpers
There are three configuration jumpers on the CPU board. Jumper JP1 is intended for a change
of the board addressing and is not used at present. It need not be applied during a common
firmware upgrade. By default, jumper JP1 is disconnected. JP2 is intended for switching serial
port between CPU board and optional extension board. By default, jumper JP2 are connected.
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 104 105

Comentarios a estos manuales

Sin comentarios