2n Helios IP Configuration Manual v2.8.1 Manual de usuario descargar pdf (Pagina 44)

442N TELEKOMUNIKACE a.s., www.2n.cz

5.3.4 Camera

This menu is only available in the models that are equipped with an2N Helios IP

internal camera or can be connected to an external camera. The camera signal can be

streamed directly into the call via a videophone, sent by E-mail, streamed via

ONVIF/RTSP to another device (a video surveillance device, e.g.), or simply HTTP

downloaded from the intercom in the JPEG format.

The following video signal sources can be used:

internal integrated camera or external analogue camera (2N Helios IP Video

only)Kit

standard external IP camera supporting MJPEG/RTSP stream with VGA (640 x

480) resolution

The menu helps you set such camera parameters as brightness, colourCamera

saturation and external IP camera login data if necessary. Refer to the Services

and menus for the video/ Phone, Services Streaming / Services E-Mail /

call/streaming parameters.

List of Parameters

Default video source – set the default video signal source. Choose an Internal

camera (or an analogue camera connected to the intercom) or an External IP

camera.

PTZ control enabled – enable the PTZ (Pan-Tilt-Zoom) function to control the camera

display area during the call via DTMF (for 2N® Helios IP Verso only) from your IP

phone numeric keypad. Click the * key to enable/disable the PTZ mode. The meanings

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 115 116

Sin comentarios

2n Helios IP Configuration Manual v2.8.1 Manual de usuario Pagina 44